Oregon Scientific RMR232PHU, RMR232PHN user manual Battery Installation Main Unit, Before YOU Begin

Page 3

ALED INDICATOR

Flashes when the remote unit transmits a reading

BBATTERY COMPARTMENT

Accommodates two UM-3 or AA-size 1.5V batteries

CBATTERY DOOR

DWALL-MOUNT RECESSED HOLE Supports the remote until in wall-mounting

GB

BATTERY INSTALLATION: MAIN UNIT

1.Slide open the battery compartment door.

2.Install 2 alkaline batteries (UM3 or “AA” size 1.5V) strictly according to the polarities shown.

BEFORE YOU BEGIN

For best operation,

1.Insert batteries for remote units before doing so for the main unit.

2.Place the main unit as close as possible next to the remote unit, reset the main unit after installing batteries. This will ensure easier synchronization between the transmission and reception of signals.

3.Position the remote unit and main unit within effective transmission range, which, in usual circumstances, is 20 to 30 meters.

Note that the effective range is vastly affected by the building materials and where the main and remote units are positioned. Try various set-ups for best result.

Though the remote units are weather proof, they should be placed away from direct sunlight, rain or snow.

3.Press the [RESET] button.

4.Replace the battery compartment door.

BATTERY INSTALLATION: REMOTE UNIT

1. Remove the screws on the battery compartment.

3

Image 3
Contents Introduction Main Features Main UnitTHREE-LINE Display Main Features Remote UnitBattery Installation Main Unit Battery Installation Remote UnitBefore YOU Begin HOW to Insert a Photo LOW Battery WarningHOW to USE the Table Stand Wall Mounting HOW to Exchange Front KEY PanelCompatible Photo Sizes Getting Started Reset ButtonHOW to Check Remote and Indoor Temperatures HOW to Read the Kinetic Wave DisplayMaximum and Minimum Temperatures Disconnected SignalsTransmission Collision About Radio Reception Calendar Clock Display ModesHOW to SET the Calendar Clock Manually HOW to SET and ARM the AlarmHOW to Stop AN Alarm Specifications PrecautionsArticle 3.1.a of the R&TTE directive Applied standards EC-DECLARATION of Conformity

RMR232PHU, RMR232PHN specifications

The Oregon Scientific RMR232PHN and RMR232PHU are sophisticated weather monitoring devices designed for both home and personal use. These models combine functionality with user-friendly features, making them ideal for weather enthusiasts and those wanting to keep up with local climate conditions.

One of the standout features of the RMR232PHN and RMR232PHU is their ability to provide real-time information on various weather parameters. These devices are equipped with advanced sensors that measure indoor and outdoor temperature, humidity levels, and barometric pressure. Users can easily monitor these conditions on a clear and intuitive display, ensuring they remain informed about their environment.

Both models utilize wireless technology to transmit data from outdoor sensors to the main unit. This feature allows for a seamless monitoring experience without the need for cumbersome wiring. The sensors can be placed at strategic locations around the home or property, ensuring accurate readings from different areas.

Additionally, the RMR232PHN and RMR232PHU come with programmable alerts, which notify users of significant changes in weather conditions. This can be especially beneficial in scenarios where sudden temperature drops or humidity spikes may impact daily activities or planning. The customizable nature of these alerts means users can tailor the notifications to their preferences, enhancing their overall user experience.

Another noteworthy characteristic of the Oregon Scientific RMR devices is their elegant design. They feature a sleek, modern aesthetic that will fit seamlessly into various home decors. The large, easy-to-read display is a significant advantage for users, as it allows for quick glances at the weather data without straining the eyes.

In terms of power, these devices are designed to be energy efficient, typically running on batteries, which empowers users to set them up in locations where electrical outlets may not be accessible.

Overall, the Oregon Scientific RMR232PHN and RMR232PHU represent a blend of style, technology, and practicality. With their comprehensive weather monitoring capabilities and user-centric features, they are excellent choices for anyone interested in keeping track of both indoor and outdoor conditions, ensuring you stay well-informed about the world around you.