Bayer HealthCare Breeze 2 manual Turn the meter off, then on using

Page 46

What You See	What It Means	What You Should Do

	1. You may have	1. Repeat the test and wait until
	applied blood too	you see the “apply blood”
	early to the test strip.	prompts before you touch the
		strip to the blood drop.
	2. There may be	2. Wick the moisture away (see
	moisture in the test	page 34), then repeat the test.
	strip slot.

	There was a problem	Release the used test strip and
	completely filling the	repeat the test with a new strip
	test strip; accurate test	(see page 10).
	result is not possible.

	1. Meter has detected	1. Release the used test strip and
	an error; accurate	repeat the test with a new strip
	result is not possible.	(see page 10).
	2. The 10-test disc may	2. Replace the 10-test disc, using a
	be past its expiration	new box if necessary.
	date or may have
	been damaged due
	to intense heat or
	moisture exposure.

	Your blood glucose level	Turn the meter off, then on using
	is very high or the meter	. Retest. If the error appears
	has detected an error;	again, call your physician or
	accurate test result is	healthcare professional. Your
	not possible.	blood glucose may be above
		1500 mg/dL. If the problem is
		with the meter, contact Bayer
		Customer Service.

42Bayer Customer Service: 1-800-348-8100

Image 46

Contents User Guide As easy as Table of Contents Technical Information Introduction Look at Your Breeze Meter Down Buttons Explanation of Display Symbols Here is what each display element means TesTIng maTerIals Everyday use InserTIng a 10-TesT dIsCInsert Disc Counting the Number of Strips Left RunnIng a blood gluCose TesT Prepare Lancing DevicePush Out Test Strip Stick your fi nger and form a small round drop of blood Test Bayer Customer Service Strip may not release properly Precautions Marking a Deleted Blood Test Understanding Your Test Results Expected Blood Glucose ValuesAlternative Site Testing Unusual Test ResultsRunnIng a ConTrol TesT Test Marking a Control Test Page Beyond Everyday use ReCallIng TesT resulTsViewing Your Averages Clearing Stored Test Results SeTuP funCTIon Setting the TimeSetting the Date Page Setting the Buzzer Level Setting the Time Format 12- or 24-hour Clock Setting the Date Format TransferrIng resulTs To a ComPuTer CleanIng your meTer RePlaCIng The baTTery To replace the battery, follow these steps Page Technical Information Solving Problems Troubleshooting and Error Codes What You See What It Means What You Should Do Turn the meter off, then on using This is a normal expected action Control solution with an acceptable Customer Service Replacement Items Warranty Information Bayer Customer Service Bayer HealthCare LLC Mishawaka, in 46544 USA