Bayer HealthCare Breeze 2 manual This is a normal expected action

What You See	What It Means		What You Should Do
	Meter has detected an		Turn the meter off, then on
	error; accurate result is		using	, then retest. If the
	not possible.		error remains, contact Bayer
			Customer Service.
or higher
The display	1. You may have		1. Press the		button again.
goes blank when	accidentally pressed
the meter is	the	button.
turned on.	2. Meter has turned		2. This is a normal expected action
	off after 3 minutes		that saves battery life. Press
	without use or after			to turn on again.
	10 minutes of no use
	while waiting for you
	to apply blood or
	control solution.
Meter will not	1. Battery life has ended.		1. Replace the battery (see page 35).
turn on.	2. Battery holder is		2. Check the battery and battery
	loose or battery is		holder to be sure they are
	installed with the		tightly in place and correctly
	+ side down.		installed (see page 37). If the
			display is still blank, replace the
			battery (CR2032).
Meter fails to	1. Not enough blood in		1. Discard the used test strip. Retest
start countdown	test strip.		using a round drop of blood.
after blood is	2. There may be debris		2. Inspect the inside of the meter
applied.
	inside the meter.		(see page 34) and remove
			debris if present. Retest.
	3. Meter failure.		3. Contact Bayer Customer Service.

www.BayerDiabetes.com43