Gossen 15122 operating instructions Gossen Foto- und Lichtmeßtechnik

Page 11

–Enter the "seconds" of the desired length of time. Confirm by pressing and holding the function button until the OK-signal will sound. The timer will now be in the Start/ Stop function.

–Push the key M to start the timer.

The display will show the remaining time of the count-down. In addition to that, during the last 10 seconds of the count- down, interrupted signals can be heard. At the end of the set time, a continued signal will sound.

–To pause the count-down, push the measuring key; pressing it again will

restart the count-down.

The timer will work in the background so that you can use other measurements.

GOSSEN Foto- und Lichtmeßtechnik

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Digisix Gossen Foto- und Lichtmeßtechnik Technical data Self-Test Preparation and self-test BatteryStandard settings Functioning of the DigisixReflected light method Functions of the Digisix Setting the film speedExposure measuring Taking a measurement outside the measuring range Use the Function button to select the function Exposure Contrast measurementsFunction Timer Gossen Foto- und Lichtmeßtechnik Watch/Alarm clock Watch Setting the time Measuring temperatures Alarm Clock1 Min./Max. temperatures Service and repairsWatch Technical dataTimer Exposure meterOrder code V069A
Top Page Image Contents