Gossen 15122 operating instructions Functions of the Digisix, Setting the film speed

2 Functions of the Digisix

Press the function button for selecting the individual functions of the Digisix.

Each time the button is pushed, the next function will be activated.

The display panel will show the functions in the following sequence.:

•Exposure metering

•Timer

•Watch

•Alarm clock

•Temperature

The next function will only be activated after the Function button has been released. When the Function button is kept pressed down for more than two seconds, the settings of that function are displayed and can be adjusted as desired.

2.1Setting the film speed

–Select the function "Exposure" and hold down the function button until the OK-signal sounds. The display will show ISO, blinking, instead of EV.

–Use the measuring key M to select the desired film speed.

When holding the key M pressed down, the film speed will automatically be increased. When getting close to the desired ISO value, release the key M and set the desired film speed by pushing the key in individual steps.

Each time you push the key, the film speed is increased by a 1/3 stop.

GOSSEN Foto- und Lichtmeßtechnik 6