Gossen 15122 operating instructions Alarm Clock, Measuring temperatures

ALARM CLOCK

–Use function button to enter the function "ALARM CLOCK" and hold it pressed down until the OK-signal will sound. The time of the alarm clock is set in the same way as the watch.

–Hold the function button until the OK-signal sounds.

–The alarm is activated or deactivated with the measuring button.

–When the alarm is activated it is shown in the display with a bell symbol.

–When the alarm is sounded it will sound each second for 1 min. It can be stopped by pressing either the measuring key or the function button.

2.7Measuring temperatures

–Use the function button to select the function TEMPERATURE and hold the button pressed down until the OK-signal sounds. To change between °C or °F read-outs, press and hold the function button until the display changes.

The Digisix will indicate the actual ambient temperature. The temperature probe is incorporated in the meter housing.

As a result, the temperature measurement may be affected if you are holding the meter in your hand. If you attach the Digisix with the clip to your camera, these errors can be avoided.

GOSSEN Foto- und Lichtmeßtechnik 13