Health O Meter 7605 manual OFF after approximately 1 minute without use

4.Release the “SCAN” button and remove the thermometer from the ear. Once the button is released, you will hear an audible “beep” to indicate the end of the temperature measurement. The temperature reading will be indicated on the thermometer display. An accompanying face will also be displayed with the temperature reading. (Please remember, since the thermometer displays only the highest temperature detected, you can remove the thermometer probe from your ear with the “SCAN” button still depressed. This will NOT result in a different temperature reading.) (See Fig. 4)

°F

Figure 4

5.Depending on the temperature detected, a smiling face on the display will indicate a temperature below 100.4°F (38°C). A frowning face displayed, accompanied by a long beep followed by two short beeps, will indicate a temperature above 100.4°F (38°C). (See Figures 5 & 6)

°F

Figure 5

°F

Figure 6

6.Upon completion of a temperature reading (performing Steps 1-5) you can start the process again and take a second temperature reading by depressing and holding the “SCAN” button again. To obtain the most accurate readings, please wait approximately 5 seconds between each separate measurement. The thermometer will turn

“OFF” after approximately 1 minute without use.

8