|
|
| Troubleshooting |
| Troubleshooting |
| |
|
|
|
|
| Symptom | Problem | Action |
|
|
|
|
| Target temperature is over or | Select target within | |
|
| under range | specifications |
| B | Low battery | Replace battery |
| Blank display | Possible dead battery | Check and/or replace battery |
| Laser does not | 1. Low or dead battery | 1. Replace battery |
| work | 2. Ambient temperature above | 2. Use in area with lower |
|
| 40 °C (104 °F) | ambient temperature |
CE Certification
The Thermometer conforms to the following standards:
•
•
•
Certification testing was conducted using a frequency range of 80 to 1000 MHz with the instrument in three orientations.
Specifications
Infrared
Measurement Range | |
Spectral Range | 8 to 14 microns |
Accuracy | ±1 % or ± 1 °C (2 °F); <0 °C (32 °F), |
| ±1 °C (2 °F) ± 0.1°/1° (Assumes |
| ambient operating temperature of 23 |
| to 25 °C (73 to 77 °F)) |
Repeatability | ±0.5 % of reading or ±1 °C (2 °F) |
Display Resolution | 0.1 °C (0.1 °F) |
Secondary Display Information | Maximum, Minimum, Differential, |
| KTC |
Response Time (95 %) | 500 ms |
Distance to Spot (D:S) | 12:1 |
Emissivity Adjustment | Three settings: low (0.3), medium |
| (0.7), high (0.95) |
Contact Probe Input | |
Input Temperature Range | |
Input Accuracy | Input accuracy ± 1.1 °C (± 2 °F) |
Display Resolution | 1 °C (1 °F) |
Laser
Sighting | Single point laser |
Power | Class 2 (II) operation; Output <1 mW, |
| wavelength 630 to 670 nm |
11