Fluke 561s user manual XWWarning, Using the Contact Temperature Probe

Page 13

Operating the Thermometer

Switch

efh012f.eps

Figure 7. Switching Between °C and °F

Using the Contact Temperature Probe

XWWarning

To avoid electrical shock or personal injury, do not connect the optional external probe to live electrical circuits.

Connect the probe to the input on the top of the Thermometer. The probe temperature and KTC appears in the secondary display. The live infrared temperature continues to show in the primary display. Connect the temperature probe as shown in Figure 8.

Note

With the probe inserted, the Thermometer stays on for 10 minutes (with laser off) after the trigger is released.

efh009f.eps

Figure 8. Connecting the Temperature Probe

Image 13

Contents 561 Limited Warranty and Limitation of Liability Table of Contents 561 Contacting Fluke IntroductionXWWarning Safety InformationInfrared Thermometer FeaturesDisplay When the battery is low, B appears on the displayButtons and Connector Buttons and ConnectorOperating the Thermometer How the Thermometer WorksLocating a Hot or Cold Spot Distance and Spot SizeEmissivity Field of ViewSwitching Between C and F XWWarning Using the Contact Temperature ProbeChanging the Battery MaintenanceCleaning the Lens Cleaning the HousingSpecifications TroubleshootingCE Certification Electrical