Safety Instructions

•Read the safety and operatinginstructionsbefore operating the apparatus.

•Retain safety and operating instructions for future reference.

•Adhere to all warnings on the apparatus and in the operating instructions manual.

•Follow all instructions for operation and use.

•Thisapparatusconformsto: IEC601-1, UL2601-1, cUL2601-1, EN 60601-1

•This apparatus is classified as Type B without Applied Part.

•Class I equipment

•Equipment not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxyde.

•FCC notice

This equipment has been tested and found to comply with the limits of a class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Power connection

•Power cord: Utilise a UL- listed detachable power cord, 3-wire, type SJ or equivalent, 18 AWG min., rated 300 V min., provided with a hospital-grade type plug 5-15P configuration for 120V application, or 6-15P for 240V application.

•Warning: This apparatus must be earthed!

•Power requirements: connect the apparatus to an AC voltage as indicated at its back. Using a lower voltage, the apparatus will not be able to operate. Using a higher voltage may damage the apparatus.

If you are not sure of the type

of power supplied, consult the power company.

•Do not overload wall outlets and extension cords as this may result in fire or electric shock.

•Mainsleadprotection(U.S.: Power cord): Supply cords should be routed so that they are not likely to be walked upon or pinched by items placed upon or against them, paying particular attention to cords at plugs and receptacles.

Water and moisture

•Never expose the apparatustorainormoisture.

•Never use the apparatus near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry tub or in a wet basement.

Ventilation

•Do not cover or block the ventilation openings in the cover of the set. When installing the apparatus in a cupboard or another closed location, heed the necessary space between the set and the sides of the cupboard.

Installation

•Place the apparatus on a flat, solid and stable surface that can bear the weight of at least 3 monitors. If you use an unstable cart or stand, the set may fall, causing serious injury to a child or adult, and serious damage to the equipment.

MGD 2621 P User's Guide 3

MGD 2621 specifications

The Barco MGD 2621 is a high-performance medical display solution engineered to meet the rigorous demands of healthcare environments. This advanced monitor is part of Barco's commitment to enhancing clinical workflow, ensuring precise diagnosis, and elevating patient care through superior imaging technology.

One of the standout features of the MGD 2621 is its remarkable display clarity. With a resolution of 2560 x 1600 pixels, this display provides stunning image detail, crucial for diagnostic processes that depend on the visibility of minute anatomical structures. The high pixel density ensures that images are crisp and clear, resulting in accurate assessments by medical professionals.

Color accuracy is another hallmark of the Barco MGD 2621. The monitor boasts a wide color gamut, facilitating true-to-life color reproduction. This feature is particularly vital in areas such as radiology and pathology, where distinguishing between subtle color differences can influence diagnosis and treatment plans.

The Barco MGD 2621 utilizes advanced DICOM conformance to faithfully reproduce medical images with consistent luminance and contrast. This adherence to DICOM standards ensures that images meet the required specifications for clinical use, facilitating reliable comparisons and evaluations.

In terms of ergonomics, the MGD 2621 is designed for optimal usability in fast-paced environments. It features flexible mounting options that allow healthcare professionals to position the monitor at heights and angles that best suit their needs. Additionally, the monitor's anti-glare glass front provides enhanced visibility under various lighting conditions, further improving the user experience.

Barco has integrated its proprietary calibration technology into the MGD 2621, ensuring that the display maintains consistent performance over time. Automatic calibration and built-in quality assurance features provide peace of mind for users, knowing that images will retain their integrity throughout their use.

Furthermore, connectivity is seamlessly addressed in the Barco MGD 2621. The monitor supports various input formats, including dual-link DVI and DisplayPort, ensuring compatibility with a wide range of imaging systems. This versatility allows for an efficient integration into existing medical infrastructure.

In summary, the Barco MGD 2621 is an exemplary choice for medical professionals requiring a reliable, high-quality display solution. Its combination of superior image clarity, color accuracy, ergonomic design, and robust connectivity makes it a pivotal tool in the pursuit of excellence in medical imaging and patient care. Healthcare institutions investing in the MGD 2621 are not just enhancing their diagnostic capabilities but are also committing to providing the highest quality of care for their patients.