Barco MGD 2621 user manual About the manuals, Calibration and adjustments Power saving system

Page 6

Calibration and adjustments

Power saving system

The conformity calibration, as well as the complete adjustment of the display, can be performed by means of the remote, user-friendly MediCal® software package. MediCal, which runs under Microsoft Windows NT, is especially developed to adjust and check BARCO’s medical displays.

A lot of adjustments can also be done on the monitor itself, by means of an extensive on- screen menu system, accessible from the rear panel controls.

The MGD 2621 P is equipped with a power saving system.

When left idle for a certain time, the computer, connected to the display, will power down the display in several steps. The power saving system can be switched on or off during the installation or adjustment of the display.

This system requires a computer imaging board that supports power saving management.

Important: It is absolutely necessary that the impedances of imaging board and display are the same. If not, the image quality will be inferior.

The MediCal software and the X-Rite DTP92 sensor are not delivered with the display.

MediCal can be ordered separately.

About the manuals

This guide is meant for people who want to install and use the MGD 2621 P display, as well as people who need to install and adjust the display. Chapter 4, Adjustments, is meant for this second category only, because it describes actions and procedures that require a technical skill to be performed properly.

The use of the software MediCal is described in the MediCal User’s Manual.

Introduction6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents MGD 2621 P Medical Greyscale Display Page Safety Instructions Contents Introduction OverviewCalibration and adjustments Power saving system About the manualsInstallation Precautions Package contentsUnpacking the display Power connection Connectors Location of controlsConnection of video signals Connection of data signals Connection of an optical sensor Important considerations How to switch on the display Operation User ControlsAdvised setting for contrast and brightness How to use LUCAdvanced Adjustments for Service Staff only On-screen menu systemWord about the memory system To exit the menu systemFocus Geometry Info SH Comp. Top SH Comp. BottomLight Luma equalizing Miscellaneous Mode selection Menu exit Maintenance Picture tubeCabinet Troubleshooting On the picture tube appears the message No Valid Sync SignalAppendix a Background Information Clamping Luminance Uniformity CorrectionBe thicker in the center Appendix B Technical Specifications Picture tubeMGD 2621 P Users Guide B410030/Rev February

MGD 2621 specifications

The Barco MGD 2621 is a high-performance medical display solution engineered to meet the rigorous demands of healthcare environments. This advanced monitor is part of Barco's commitment to enhancing clinical workflow, ensuring precise diagnosis, and elevating patient care through superior imaging technology.

One of the standout features of the MGD 2621 is its remarkable display clarity. With a resolution of 2560 x 1600 pixels, this display provides stunning image detail, crucial for diagnostic processes that depend on the visibility of minute anatomical structures. The high pixel density ensures that images are crisp and clear, resulting in accurate assessments by medical professionals.

Color accuracy is another hallmark of the Barco MGD 2621. The monitor boasts a wide color gamut, facilitating true-to-life color reproduction. This feature is particularly vital in areas such as radiology and pathology, where distinguishing between subtle color differences can influence diagnosis and treatment plans.

The Barco MGD 2621 utilizes advanced DICOM conformance to faithfully reproduce medical images with consistent luminance and contrast. This adherence to DICOM standards ensures that images meet the required specifications for clinical use, facilitating reliable comparisons and evaluations.

In terms of ergonomics, the MGD 2621 is designed for optimal usability in fast-paced environments. It features flexible mounting options that allow healthcare professionals to position the monitor at heights and angles that best suit their needs. Additionally, the monitor's anti-glare glass front provides enhanced visibility under various lighting conditions, further improving the user experience.

Barco has integrated its proprietary calibration technology into the MGD 2621, ensuring that the display maintains consistent performance over time. Automatic calibration and built-in quality assurance features provide peace of mind for users, knowing that images will retain their integrity throughout their use.

Furthermore, connectivity is seamlessly addressed in the Barco MGD 2621. The monitor supports various input formats, including dual-link DVI and DisplayPort, ensuring compatibility with a wide range of imaging systems. This versatility allows for an efficient integration into existing medical infrastructure.

In summary, the Barco MGD 2621 is an exemplary choice for medical professionals requiring a reliable, high-quality display solution. Its combination of superior image clarity, color accuracy, ergonomic design, and robust connectivity makes it a pivotal tool in the pursuit of excellence in medical imaging and patient care. Healthcare institutions investing in the MGD 2621 are not just enhancing their diagnostic capabilities but are also committing to providing the highest quality of care for their patients.
Top Page Image Contents