Omega Vehicle Security HH506 manual T1 T2/T1-T2 Main display Input Selection

Page 8

4T1 T2/T1-T2 Main display Input Selection

The input selection indicates which input is selected for main display; T1 thermocouple, T2 thermocouple or the difference between the two thermo- couples (T1-T2), when the thermometer is turned on, it is set to T1, When main display input selected T1, then T1 input can select alternate of thermocouple by pressing TYPE key switch.

5K/J/T/E/R/S/N T1 Input Thermocouple Type Select (Main display)

The TYPE key switch the T1 input circulating selects the K/J/T/E/R/S/N type thermocouple as input, when main display input selected T1.

When the thermometer is turned on, it is set to the type selected that was in use when the thermometer was last turned off.

6MIN MAX with Time record Mode (only Main display)

Press MIN MAX key to enter the MIN MAX Recording mode, (displays the Maximum reading with time, Minimum reading with time and Average

reading stored in record mode). In the this mode the automatic power-off feature is disabled and key, °C/°F key, REL key, SET key, Hi/Lo Limits key and main display T1 T2 T1-T2 key, TYPE key are disabled.

The beeper emits a tone when a new minimum or maximum value is recorded.

Push MIN MAX key to cycle through the MAX, MIN and AVG readings. If an overload is recorded, the averaging function is stopped and average value display"----.-".

6

Image 8
Contents Omega Omega.comTM Safety Information IntroductionSpecifications ElectricalT/E-TYPE Environmental Power Switch F Selecting the Temperature ScaleHold Mode only Main display Operating InstructionsJ/T/E/R/S/N T1 Input Thermocouple Type Select Main display MIN MAX with Time record Mode only Main displayT1 T2/T1-T2 Main display Input Selection REL Relative mode only Main display Hi/Lo Limits mode only Main display 10 T1/T2 T1-T2 second display Input Selection ButtonOperator Maintenance Battery ReplacementHH 506R/HH 507R Calibration Procedure Warranty / Disclaimer 2811/0799