Omega Vehicle Security HH506 manual 10 T1/T2 T1-T2 second display Input Selection, Button

Page 11

3.Time set mode, (Press ENTER key can escape Time set mode) = = : = = = =is displayed in third display. Time (hours, minutes, seconds) value is entered via overlay numbers, then press overlay ENTER key. Time start from set time value and exit set mode.

10T1/T2 T1-T2 second display Input Selection

The input selection indicates which input is selected for second display; T1 thermocouple, T2 thermocouple or the difference between the two thermo- couples (T1-T2), when the thermometer is turn on, it is set to T2 input can select alternate of thermocouple by second display TYPE key switch.

11K/J/T/E/R/S/N T2 Input Thermocouple Type Select (Second display)

The TYPE key switch the T2 input circulating selects the K/J/T/E/R/S/N type thermocouple as input, when second display input selected T2.

When the thermometer is turned on, it is set to the type selected that was in use when the thermometer was last turned off.

12"" Button

Press "" button to toggle on and off of backlight. The backlight will switch- off automatically after 60 seconds.

9

Image 11
Contents Omega Omega.comTM Introduction Safety InformationElectrical SpecificationsT/E-TYPE Environmental Operating Instructions Power SwitchF Selecting the Temperature Scale Hold Mode only Main displayJ/T/E/R/S/N T1 Input Thermocouple Type Select Main display MIN MAX with Time record Mode only Main displayT1 T2/T1-T2 Main display Input Selection REL Relative mode only Main display Hi/Lo Limits mode only Main display Button 10 T1/T2 T1-T2 second display Input SelectionBattery Replacement Operator MaintenanceHH 506R/HH 507R Calibration Procedure Warranty / Disclaimer 2811/0799