P3 International P0270 operation manual Introduction, Features, Overview

Page 2

introduction

Congratulations on your purchase of the P0270 Mold Alert!

Mold is as old as the Earth and it’s everywhere. Under the right set of conditions, it can actually start to grow inside your home. Some types of mold even contain mycotoxins (toxins produced by fungus-type organisms) which can be hazardous to your health.

Mold can grow at humidity levels over 65%. If you keep the relative humidity in your home below 50%, mold growth can be inhibited. The Mold Alert Thermo-Hygrometer allows you to monitor some of the key factors in the home that can lead to mold, dust mites, and bacteria.

features

Audible and Visual alarm function to indicate risk of mold

Room Temperature

Indoor Relative Air Humidity

Dew Point

Maximum and Minimum values

On/Off switch for audio alarm

overview

The interaction of temperature and air humidity:

Cold air absorbs little or no moisture. When this air enters living areas it becomes warmer and can then absorb much more water vapor. This interdependency of temperature and relative humidity is expressed by means of the dew-point.

If the measuring unit indicates an air temperature of 68°F and a relative humidity of 65%, then the dew-point temperature will be 56°F. What does this mean? That the air, in your bedroom for instance, will condense and form water droplets on surfaces that are cooler than 56°F, and these damp areas may lead to mold.

Image 2
Contents Mold Alert Introduction FeaturesInteraction of temperature and air humidity OverviewStartup Reading the display Set upSuggestions for Placement of the Unit If humidity levels are high MaintenanceMinimum/Maximum Temperatures If humidity levels are low enoughSpecifications Page P3 International Corporation Limited Warranty