PRODUCT CARE AND STORAGE
1. General
•Clean off dirt in the main body with a clean, soft and dry cloth.
•Do not clean the main body with water nor a cleaner containing abrasive agents, thinner or benzene.
•Before and after each use, clean the thermometer.
2. Batteries
•If the low battery indicator flashes during use, replace with new batteries, refer to page 5 under preparation before use point 2 on the procedure for replacement of new batteries.
•Remove the batteries if you will not be the product for a long period of time.
3. Probe
•Clean the probes surface with a cotton swab slightly moistened with alcohol and immediately dry it with a clean cotton swab. After cleaning, allow at least 5 minutes to dry before using it again.
•Do not clean the probe with a paper towel or paper as it contains glass fiber, which may damage the lens at the tip of the probe.
•After cleaning , dry the probe thoroughly before store it.
•To assure a high level of accuracy, it is very important to keep the probe clean, dry and unchanged. Fingerprints, earwax. dust and other soiling compounds reduces the transparency of the window and results in lower temperature reading.
•Avoid touching the probe except when cleaning is required.
•As the probe is the most sensitive and delicate part of the thermometer, it is extremely important to ensure that a probe cover is always on the probe to protect it from dirt and damage.
4. Storage
•Do not store the ear thermometer under direct sunlight or in places where temperature and humidity are very high or very low, in dusty or wet places, or where the product be affected by a vibrating shock.
BATTERY WARNING:
Keep battery out of child’s reach. Swallowing battery could be fatal. Battery should not be charged or placed in extreme heat as it may rupture. Used batteries should be disposed of properly.
11