2) Then, push the POWER/MEASURE switch momentarily to display the measure screen.
*If the POWER/MEASURE switch is pushed and held for a while (about 1 second), the power is turned off. When displaying the measure screen while the power is turned on, push and release the POWER/MEASURE switch quickly.
*To change the basal body temperature recording mode ( LADY is displayed) to the
3)Place the sensor of the probe under your tongue to start measurement. If peeps are heard, the measurement is in error (“E” is displayed). In this case, push the POWER/ MEASURE switch again and start measurement.
English
4)A pip is heard. When more pips are heard about 5 minutes after measurement is started, measure-
ment is finished.
*The first electronic pip indicates that the tempera- ture is being measured normally.
Ending of measurement
- Eng 15 -