6.Twist the mounting pin (D) clockwise to remove from the mounting peg (E).
7.Position the mounting pin into the opening in the slot (F).
8.Position the mounting peg under the bath board and onto the mounting pin.
9.Twist the mounting peg clockwise to secure it to the mounting pin.
10.Repeat STEPS 4 to 7 for the remaining three mounting pegs.
11.Turn the bath board over.
12.Twist each mounting peg counterclockwise to loosen.
13.Slide the mounting pegs towards the middle of the bath board.
14.Turn the bath board over.
15.Position the bath board in the tub.
16.Slide the mounting pegs towards the ends of the bath board.
17.Turn the mounting pegs counterclockwise to secure the bath board in the tub. Torque to 53
18.Insert plugs (G) into the openings in the slots.
6
D
E
F
12
13
15
G
16
17
Bath Board | 4 | Part No 1167609 |