Invacare 1200, 1300, 1500, 1600 manual Calibrating the 1100 Bath Scale

Page 23

USING THE SCALE

Calibrating the 1100 Bath Scale

NOTE: For this procedure, refer to FIGURE 3.1 on page 20 and FIGURE 3.4.

1.The patient MUST be removed from the bath lift to properly calibrate the bath scale. Refer to Transferring into/out of the Lift of the Bath Lift Owner’s Manual for instructions.

2.Remove the seat/stretcher from the bath lift.

Lock the two rear locking casters.

Press on the down arrow on the hand pendant to lower the bath lift.

Remove the three bolts that secure the hanger rods to the bath scale.

Pull the hanger rods away from the patient scale to remove the seat or stretcher from the bath lift.

3.Remove the four screws that attach the cover to the bath scale.

NOTE: The RUN/CAL switch is located next to the display window and is visible after the cover is removed.

4.Slide the switch marked RUN/CAL to the CAL position.

5.Adjust R9 so the display indicates +15 pound offset. Refer to Detail “A” of FIGURE 3.4.

6.Reverse STEP 2 to attach the seat or stretcher to the bath lift.

7.Make note of the weight of the seat or stretcher on the display.

8.Put 200 pounds of calibrated weight on the seat or stretcher. Check for the proper weight increase relative to the weight of the seat or stretcher noted in STEP 7.

9.Adjust R18 until the weight on the display is accurate of the combined weight of the calibrated weight and the weight of the seat or stretcher. Refer to Detail “A” of FIGURE 3.4.

10.Remove the calibrated weight from the bath scale. Repeat STEPS 5‐9 as necessary.

11.Slide the RUN/CAL switch to the RUN position. Press the ZERO button.

12.When the display window reads 0.0, place the calibrated weight on the seat or stretcher and make sure the weight on the display is correct.

13.Remove the calibrated weight from the bath scale.

NOTE: The bath scale is ready for use.

Screw (1 of 4)

Cover

DETAIL “A” - 1100 BATH SCALE CIRCUIT BOARD

R9 Adjustment Screw

R18 Adjustment Screw

FIGURE 3.4 Calibrating the 1100 Bath Scale

Part No. 1150696

23

Traverse Lift/Transporter

Image 23
Contents Traverse Lift/Transporter Accessories Warning Table of Contents Accessories Meaning Special NotesLabel Location Scale Typical Product ParametersTraverse Lifts Lifting/Transferring General GuidelinesOperating the Lift Pinch Points Performing MaintenanceElectrical Grounding Instructions Locking and Unlocking the Casters Operating the Bath LiftTransferring into/out of the Lift Using the StretcherTransferring into/out of the Tub Transferring into/out Lift Using the SeatTransferring into/out of the Tub Raising/Lowering the Bath LiftDisinfecting the Lift Disinfecting the Lift Mounting the Battery ChargerUsing the Wall-Mounted Battery Charger Charging the BatteryUsing the Wall-Mounted Battery Charger Using the On-Board Battery Charger Removing/Installing the Bath Scale Using the ScaleBath Lift shown Location Definition FunctionsReplacing the Battery Replacing the BatteryCalibrating the 1100 Bath Scale Calibrating the 1100 Bath ScaleAdjusting the Frame Column Height AdjustmentsAdjusting the Lift Column Adjusting the Lift ColumnSafety Inspection Checklists Maintenance and TroubleshootingDetecting Wear and Damage Care and Maintenance of Bath LiftCleaning the Lift Lift TroubleshootingInstalling the Stretcher Cover AccessoriesSeat Straps Installing the Short Stretcher Padded CoverBack Straps Head Support/Mesh Pillow/Safety Straps Accessories Accessories Limited Warranty USA and Canada Manufacturing Location
Related manuals
Manual 1 pages 47.13 Kb

1500, 1600, 1200, 1300 specifications

The Invacare 1300 is a renowned product designed to enhance the quality of life for individuals requiring mobility assistance. This mobile device comes equipped with advanced technologies and features that make it one of the most reliable choices in the market. The model numbers 1035965 and 1035966 signify different configurations that cater to various user needs, emphasizing Invacare's commitment to versatility and user satisfaction.

The Invacare 1300 is built to provide excellent support and comfort. One of its main features is its user-friendly design, which includes an adjustable height mechanism, allowing users to customize the device to their specific requirements. This adaptability places it at the forefront of mobility technology, making it suitable for a wide range of users with varying mobility issues.

Another key characteristic of the Invacare 1300 is its lightweight construction, ensuring easy maneuverability without compromising on durability. The frame is made from robust materials that provide structural integrity, while still being easy to transport. Powered by advanced wheel technology, the device offers a smooth ride on diverse terrains, enhancing user confidence and stability.

Safety is a primary concern in the design of the Invacare 1300. It is equipped with reliable braking systems that allow users to stop securely irrespective of the surface. Additionally, the handgrips are ergonomically designed to prevent strain during use, making it a safe choice for daily mobility needs.

Incorporating modern technology, the Invacare 1300 features integrated support for various accessories that can be added depending on user preferences. These can include features such as storage options and additional support systems, allowing users to personalize their mobility experience further.

Ultimately, the Invacare 1300 model, particularly its variations 1035965 and 1035966, stands out for its combination of comfort, safety, and adaptability. Its thoughtful construction and innovative features make it an essential tool for individuals seeking to maintain independence while managing mobility challenges. With its emphasis on quality and user-centric design, the Invacare 1300 remains a leading product in the realm of mobility assistance, improving the lives of countless users worldwide.