Invacare 1300, 1500, 1600, 1200 manual Adjustments, Adjusting the Frame Column Height

Page 24

ADJUSTMENTS

SECTION 4—ADJUSTMENTS

Adjusting the Frame Column Height

NOTE: For this procedure, refer to FIGURE 4.1.

If the lift seat or stretcher touch the bottom of the bathing system or are too high for the bathing system, use this procedure to ensure the frame column has been adjusted to the proper height.

NOTE: The bottom of the seat or the stretcher should be approximately two inches above the bottom of the bathing system.

1.Lower the lift. Refer to Raising/Lowering the Bath Lift on page 13.

2.Lock the casters. Refer to Locking and Unlocking the Casters on page 10.

3.Stretchers Only ‐ Perform the following to fold up both ends of the stretcher:

A.Press and hold the button on the stretcher frame.

B.Fold up the end of the stretcher.

C.Repeat STEPS A and B for the other end of the stretcher.

4.Press and hold the release lever.

5.Swing the bottom of the stretcher or seat out and up.

6.Raise or lower the stretcher or seat onto one of the six column stops.

Stretcher End

Column

 

Stops

 

Stretcher Frame

 

Button

Column Stop

 

Stretcher

Release Lever

 

 

Column Stop

 

 

 

 

 

FIGURE 4.1 Adjusting the Frame Column Height

Traverse Lift/Transporter

24

Part No. 1150696

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Traverse Lift/Transporter Accessories Warning Table of Contents Accessories Special Notes MeaningLabel Location Typical Product Parameters Traverse LiftsScale General Guidelines Operating the LiftLifting/Transferring Performing Maintenance Electrical Grounding InstructionsPinch Points Operating the Bath Lift Locking and Unlocking the CastersUsing the Stretcher Transferring into/out of the LiftTransferring into/out Lift Using the Seat Transferring into/out of the TubRaising/Lowering the Bath Lift Transferring into/out of the TubDisinfecting the Lift Mounting the Battery Charger Disinfecting the LiftCharging the Battery Using the Wall-Mounted Battery ChargerUsing the Wall-Mounted Battery Charger Using the On-Board Battery Charger Using the Scale Removing/Installing the Bath ScaleBath Lift shown Functions Location DefinitionReplacing the Battery Replacing the BatteryCalibrating the 1100 Bath Scale Calibrating the 1100 Bath ScaleAdjustments Adjusting the Frame Column HeightAdjusting the Lift Column Adjusting the Lift ColumnMaintenance and Troubleshooting Safety Inspection ChecklistsCare and Maintenance of Bath Lift Cleaning the LiftDetecting Wear and Damage Troubleshooting LiftAccessories Installing the Stretcher CoverInstalling the Short Stretcher Padded Cover Seat StrapsBack Straps Head Support/Mesh Pillow/Safety Straps Accessories Accessories Limited Warranty USA and Canada Manufacturing Location
Related manuals
Manual 1 pages 47.13 Kb

1500, 1600, 1200, 1300 specifications

The Invacare 1300 is a renowned product designed to enhance the quality of life for individuals requiring mobility assistance. This mobile device comes equipped with advanced technologies and features that make it one of the most reliable choices in the market. The model numbers 1035965 and 1035966 signify different configurations that cater to various user needs, emphasizing Invacare's commitment to versatility and user satisfaction.

The Invacare 1300 is built to provide excellent support and comfort. One of its main features is its user-friendly design, which includes an adjustable height mechanism, allowing users to customize the device to their specific requirements. This adaptability places it at the forefront of mobility technology, making it suitable for a wide range of users with varying mobility issues.

Another key characteristic of the Invacare 1300 is its lightweight construction, ensuring easy maneuverability without compromising on durability. The frame is made from robust materials that provide structural integrity, while still being easy to transport. Powered by advanced wheel technology, the device offers a smooth ride on diverse terrains, enhancing user confidence and stability.

Safety is a primary concern in the design of the Invacare 1300. It is equipped with reliable braking systems that allow users to stop securely irrespective of the surface. Additionally, the handgrips are ergonomically designed to prevent strain during use, making it a safe choice for daily mobility needs.

Incorporating modern technology, the Invacare 1300 features integrated support for various accessories that can be added depending on user preferences. These can include features such as storage options and additional support systems, allowing users to personalize their mobility experience further.

Ultimately, the Invacare 1300 model, particularly its variations 1035965 and 1035966, stands out for its combination of comfort, safety, and adaptability. Its thoughtful construction and innovative features make it an essential tool for individuals seeking to maintain independence while managing mobility challenges. With its emphasis on quality and user-centric design, the Invacare 1300 remains a leading product in the realm of mobility assistance, improving the lives of countless users worldwide.
Top Page Image Contents