Industrial Control Transformers
Multiple Secondary
MULTIPLE SECONDARY
Designed to meet the needs for both 24 V control and 120 V control. Available in the 9070 Type T product line, with all the type T features.
Tapped Secondary D15: 24 V rated for 20% capacity and 120 V rated for 80% capacity when simultaneous loading, or 100% loading when 120 V only.
20% rating at 24 V or 100% rating at 120 V gives equal output current from the device.
VA | 24 V amps | 120 V amps |
|
|
|
50 | .416 | .416 |
|
|
|
75 | .625 | .625 |
|
|
|
100 | .833 | .833 |
|
|
|
150 | 1.25 | 1.25 |
|
|
|
200 | 1.67 | 1.67 |
|
|
|
250 | 2.08 | 2.08 |
|
|
|
300 | 2.5 | 2.5 |
|
|
|
350 | 2.9 | 2.9 |
|
|
|
500 | 4.17 | 4.17 |
|
|
|
750 | 6.25 | 6.25 |
|
|
|
1000 | 8.3 | 8.3 |
|
|
|
1500 | 12.5 | 12.5 |
|
|
|
2000 | 16.7 | 16.7 |
|
|
|
3000 | 25 | 25 |
|
|
|
5000 | 41.7 | 41.7 |
|
|
|
Tapped Secondary D65: Both outputs fully rated for
Separate Windings Options: All voltage codes offer fully rated
Features of separate windings:
1.Allows two isolated control circuits, 24 V and 120 V, from the same device
2.Wire sizing for circuits for each voltage not highest current for common when simultaneous loading. (no common)
3.If a common is required, it can be obtained with a jumper kit.
19
08/2005 |
|
|
| © |