SECTION IX – PARTS LIST
Yale “Global King” Hoists are built in two basic frame sizes, “B” Frame and “C” Frame. To determine the size of your hoist, measure the width of the gearcase (see Figure
Certain parts of your hoist will, in time, require replacement under normal wear conditions. It is suggested that these parts be purchased for your hoist as spares for future use. These parts are indicated by a (†) symbol at the side of the parts reference numbers.
The numbers assigned to parts of our various assemblies in our parts list are not the part numbers used in manufacturing the part. They are identification numbers, that when given with the model number, permit us to identify, select or manufacture, and ship the correct part needed.
WHEN ORDERING PARTS OR INFORMATION ON THIS EQUIPMENT, ALWAYS INCLUDE MODEL AND SERIAL NUMBER ON ORDER.
WARNING
Using “Commercial” or other manu- facturer’s parts to repair Global King Hoists may cause load loss.
TO AVOID INJURY:
Use only Yale Hoist supplied parts. Parts may look alike but Yale Hoist parts are made of specific materials or processed to achieve specific properties
LIST OF PART ILLUSTRATIONS
TITLE | FIGURE No. | PAGE No. |
Hoist Drum, Drum Frame, Gearcase, Motor, Rope Guide, and Limit Switch | 30 | |
Hoist Gearing | 32 | |
Motor Driven Trolley Frame and Drive | 34 | |
Lower Block Assembly | 36 | |
Upper Block Assembly | 38 | |
“B” Frame Rope and Dead End Assembly | 39 | |
“C” Frame Rope and Dead End Assembly | 40 | |
Block Operated Limit Switch Assembly | 40 | |
Rope Guide Assembly | 42 | |
Hoist Motor Brake | 43, 44 | |
“B” Trolley Drive Gear Reducer | 45 | |
“C” Trolley Drive Gear Reducer | 46 |
29