Kohler K-812-N1 manual Lighted User Keypad

Flexjet Flow Mode

Activates Mode Selected

Backjet Mode-Adjust Pulse

Rotate outer ring to access desired mode.

Power On/Off

Indicator Bar - Shows waterflow volume or pulse speed

Increases Flow or Pulse

Neckjet Mode-Adjust Pulse

Decreases Flow or Pulse

Heater

Lighted User Keypad

User Keypad

NOTE: The illustration of the user keypad differs slightly from the user keypad equipped with your model. The Backjet Mode is not equipped with your model.

Available modes will be illuminated in blue. Active modes will be illuminated in green.

PowerTurns the whirlpool pump on and off. Icons illuminated in blue indicate available modes/features. Modes which are operating will be illuminated in green.

Outer Ring	Rotate the outer ring to the desired mode. The selected mode will flash blue.
OK	Activates the desired mode.
Flexjet Flow	Rotate the outer ring to select this mode. Press OK, then press the up or down arrow to
Mode	increase or decrease the jet water flow.
Up Arrow	Increases the water flow when the Flexjet flow mode is active. Increases the pulse speed
	when the neckjet or backjet mode is active.
Indicator Bar	Displays the water flow volume in the Flexjet flow mode. Displays the pulse speed in the
	neckjet or backjet mode.
Neckjet Mode	Rotate the outer ring to select this mode. Press OK, then press the up or down arrow to
	increase or decrease the pulsing action. Rotate the outer ring to the Flexjet mode, press OK
	to activate the mode, then press the up or down arrow on the keypad to increase or
	decrease water flow to the neckjets and all other active modes.
Down Arrow	Decreases the water flow when the Flexjet flow mode is active. Decreases the pulse speed
	when the neckjet or backjet mode is active.
Heater	Automatically engages when the power icon is selected. Rotate the outer ring until the
	heater mode is flashing, then press OK to turn the heater off. Press OK again to turn the
	heater back on.

1019490-5-C 4 Kohler Co.