Stow 2100, 2600, 900 Do not follow directions, Always wear approved eye and hearing protection

Page 6

VIBRATOR HEADS— SAFETY MESSAGE ALERT SYMBOLS

FOR YOUR SAFETY AND THE SAFETY OF OTHERS!

HAZARD SYMBOLS

Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others.

NOTE

This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the STOW VIBRATOR HEADS.

Before using this equipment, ensure that the operating individual has read and understands all instructions in this manual.

SAFETY MESSAGE ALERT SYMBOLS

The three (3) Safety Messages shown below will inform you about potential hazards that could injure you or others. The Safety Messages specifically address the level of exposure to the operator, and are preceded by one of three words: DANGER, WARNING, or CAUTION.

DANGER: You WILL be KILLED or SERIOUSLY injured if you DO NOT follow directions.

WARNING: You CAN be KILLED or SERIOUSLY injured if you DO NOT follow directions.

CAUTION: You CAN be injured if you

DO NOT follow directions.

Potential hazards associated with Stow VIBRATOR HEADS operation will be referenced with "Hazard Symbols" which appear throughout this manual, and will be referenced in conjunction with Safety "Message Alert Symbols".

Engine exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. NEVER operate this equipment in a confined area or enclosed structure that does not provide ample free flow air.

Explosive Fuel

Gasoline is extremely flammable, and its vapors can cause an explosion if ignited. DO NOT start the engine near spilled fuel or combustible fluids. DO NOT fill the fuel tank while the engine is running or hot. DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system. Store fuel in approved containers, in well-ventilated areas and away from sparks and flames. NEVER use fuel as a cleaning agent.

Burn Hazards

HighTemperatures – Unplug the machine and allow to cool before performing service and maintenance functions. Contact with hot! components can cause serious burns.

Rotating Parts

NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury.

Sight and Hearing hazard

ALWAYS wear approved eye and hearing protection.

Accidental Starting

ALWAYS place the motor ON/OFF switch in the OFF position, when the Vibrator Motor is not in use.

PAGE 6 — VIBRATOR HEADS— PARTS & OPERATION MANUAL — REV. #1 (04/22/02)

Image 6
Contents Stow Vibrator Heads Page Heres HOW to GET Help MQ Stow Vibrator Heads Vibrator HEADS- Parts Ordering Procedures UPS Third Day Service at one-half of actual freight costDo not follow directions Always wear approved eye and hearing protectionVibrator HEADS- Rules for Safe Operation Always know the location of the nearest and first aid kitSee Compaction Coverage Chart, Figure Vibrator HEADS-PREPARATION & OperationBearing HousingNut or Screw SpindleVibrator Heads Maintenance Assemble the lower bearings to the spindle. RefAllow to set one hour before use Vibrator Heads Specifications General SpecificationsVibrator Heads Seal Installation Seal lip to face vibrator head endPage SV-SERIES Vibrator Head Assy Item no Description SV-SERIES Vibrator Head Assy Seal Terms and Conditions of Sale Page Heres HOW to GET Help