Graham Field LF1030, LF1040 owner manual

Page 12

6.Screw the push handles into the mast and tighten the nuts.

7.Remove the bolt from the top of the spreader bar, taking care not to drop the pin assembly. Install the spreader bar in the U bracket at the end of the boom. Align holes. Insert bolt and tighten.

8.Install the base adjustment handle in the socket located behind the mast sleeve on the base. With base handle to the far right position, insert and tighten base attachment bolt to ensure that the handle is firmly attached to the base.

9.LF1030 only: For shipping purposes, the boom is in its lowest position. To elevate, turn the pump knob clockwise until hand tight and operate the pump handle.

12LF1030 HYDRAULIC PATIENT LIFT / LF1040 ELECTRIC PATIENT LIFT OWNER'S MANUAL, 10/03

Image 12

Contents LF1030 Hydraulic Patient Lift LF1040 Electric Patient Lift Page Contents Introduction Maintenance Special NotesSafety Precautions Page Features LF1040 electric Patient liftHandling Procedures Shipping and Transportation InstructionsUnpacking InspectionAssembly Instructions Assembly Page Charging the battery LF1040 only Electrical connections LF1040 onlyEmergency Procedures LF1040 only Operating Instructions Lifting the PatientLifting the patient from a bed Lowering the patient onto a bed Lifting the patient from the floorLowering the patient to the floor Transferring the patient from a chair to a wheelchairRemoving sling Care and Maintenance BatteryBefore each use LubricationCleaning Checking for damage and wearCare of sling Maintenance Schedule Base and CastersTroubleshooting LF1030 Hydraulic Patient LiftLF1040 Electric Patient Lift Specifications Limited Warranty Product Warranty PeriodPage Index Page Page A., Corporate Headquarters Graham-Field Health Products