Graham Field LF1040, LF1030 owner manual Assembly

Page 11

Assembly

1.Remove the locking pin from the mast sleeve located on the rear of the base.

2. Install the L-inserts in the base.

3.With the boom pointed in the same direction as the base legs, insert the mast into the sleeve.

4.Insert the locking pin through the holes of the sleeve and mast, and attach the locking cable to the end of the pin.

5.Screw the two mast attachment bolts into the holes in the sleeve of the base.

LF1030 HYDRAULIC PATIENT LIFT / LF1040 ELECTRIC PATIENT LIFT OWNER'S MANUAL, 10/03

11

Image 11

Contents LF1030 Hydraulic Patient Lift LF1040 Electric Patient Lift Page Contents Introduction Special Notes MaintenanceSafety Precautions Page LF1040 electric Patient lift FeaturesInspection Handling ProceduresShipping and Transportation Instructions UnpackingAssembly Instructions Assembly Page Electrical connections LF1040 only Charging the battery LF1040 onlyEmergency Procedures LF1040 only Lifting the patient from a bed Operating InstructionsLifting the Patient Transferring the patient from a chair to a wheelchair Lowering the patient onto a bedLifting the patient from the floor Lowering the patient to the floorRemoving sling Lubrication Care and MaintenanceBattery Before each useCare of sling CleaningChecking for damage and wear Base and Casters Maintenance ScheduleLF1040 Electric Patient Lift TroubleshootingLF1030 Hydraulic Patient Lift Specifications Product Warranty Period Limited WarrantyPage Index Page Page A., Corporate Headquarters Graham-Field Health Products