Operator's Manual | First Edition • Eighth Printing |
|
|
|
|
FUNCTION TESTS
Test One-Speed Winch Operation
1Install a load handling attachment.
2Raise the carriage by
firmly grasping the | down |
winch handles and |
|
rotating them towards |
|
the mast. |
|
Result: The winch up should operate smoothly, free of hesitation or binding.
3Lower the carriage by firmly grasping the winch handles and rotating them away from the mast. After lowering to the desired position, turn the winch handles toward the mast (raise the load) 1/4 turn to set the brake.
Result: The winch should operate smoothly, free of hesitation or binding.
Test Two-Speed Winch Operation
1Install a load handling attachment.
2Shift the winch to the slow speed.
3Raise the carriage by firmly grasping the winch handles and rotating
them towards the | down | |
mast. | ||
| ||
Result: The winch |
| |
should operate |
| |
smoothly, free of |
| |
hesitation or binding. up |
|
4Lower the carriage by firmly grasping the
winch handles and rotating them away from the mast. After lowering to the desired position, turn the winch handles toward the mast (raise the load) 1/4 turn to set the brake.
Result: The winch should operate smoothly, free of hesitation or binding.
5Shift the winch to the fast speed and repeat steps 3 and 4.
Test Mast Sequencing
1Install a load handling attachment.
2Raise the carriage to full height by firmly grasping the winch handles and rotating them towards the mast.
Result: The carriage should raise to the top of the front mast section, followed in consecutive order by each mast section.
3Fully lower the carriage. After lowering to the desired position, turn the winch handles toward the mast (raise the load) 1/4 turn to set the brake.
12 | Genie Superlift Contractor | Part No.33547 |