Genie 33547 manual Safety Rules, Do Not Operate Unless

Page 3

First Edition • Eighth Printing

Operator's Manual

 

 

 

 

 

 

Safety Rules

Warning

Failure to obey the instructions and safety rules in this manual may result in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe machine operation contained in this operator's manual.

1 Avoid hazardous situations.

Know and understand the safety rules before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform the function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the manufacturer's instructions and safety rules— safety and operator's manuals and machine decals.

You read, understand and obey employer's safety rules and worksite regulations.

You read, understand and obey all applicable governmental regulations.

You are properly trained to safely operate the machine.

Part No.33547

Genie Superlift Contractor

1

Image 3
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Fall HazardsCollision Hazards Lifting HazardsElectrocution Hazards Crushing Hazards Bodily Injury HazardImproper Use Hazard Decal Legend Page Fundamentals Pre-operation InspectionPre-operation Inspection Function Tests Function Tests SetupAdjustable Fork and Adjustable Fork Options Load Platform with Adjustable ForksStandard Boom Test One-Speed Winch Operation Test Two-Speed Winch OperationTest Mast Sequencing Workplace Inspection Only use the machine as it was intended Operating InstructionsDown Raising and Lowering LoadMoving Machine with a Load After Each UseLoad Capacity Charts Observe and ObeyForks Load Positioning Instructions Model Load Capacity Chart Load CenterBoom Load Positioning Instructions Maximum Load CentersInspection for Decals with Words Decals32687 33468 32775 Inspection for Decals with Symbols Decals Transport and Lifting Instructions Loading the MachineLoading Machine with a Crane SLC-6 SpecificationsGenie Scandinavia