Ingenico 7780 manual TNV-3, Ingenico Terminal connections

Page 16

Ingenico 7780

3.3 Terminal connections

All the Ingenico 7780 connections are made via the base.

	Telephone line	Power supply plug	RS-232 serial ports
	TNV-3	SELV	SELV
* SELV	: Separated Extra Low Voltage
** TNV-3	: Telecommunication network voltage

0The power supply socket and telephone socket should comply with applicable standards. Ask your installer for advice.

0Connection to the electric network should be carried out last when the telephone or any peripherals have been connected.

0Maximum length of cable: 2m50

Connection to the Switched Telephone Network (STN)

Connect the telephone cable connector (supplied

with the terminal) to the socket marked and connect the other end to the telephone wall support.

Telephone line [TNV-3**]

16

Image 16

Contents 7780 Page Contents Thank you for choosing an Ingenico product IngenicoPresentation Terminal and baseIngenico Overview of Ingenico Keyboard details and functionality Navigation keys navigate in the terminal menusIngenico Use Present Card 11/07/02 15h01Ingenico Terminal maintenance Card readingIngenico Changing the roll of paper Bluetooth technology Regulations December Installation and startingLocation of the terminal and the base Battery set up and charging Ensure that the terminal is seated securely on the basePage Ingenico Terminal connections TNV-3TNV-3 Cable securing plate Line extension Line Line 1 optionInstalling a SIM card and a full format card Full format card connectors Foolproof lugInstalling the full format card Troubleshooting Terminal does not turn on You cannot connect to the telephone networkIngenico Recommendations SafetySecurity RF Safety Ingenico Switched Telephone Network STNGeneral safety Weee Battery IndexNON Contractual Document Ingenico