565G UPHOLSTERY REMOVAL AND
REPLACEMENT
BACK CUSHION
To remove: Release the two elastic straps which hold the button of the cushion to the back frame with small wire rings (See fig. 10).
Frame | Key Ring |
Hook
Figure 10
Figure 12
Grip top of cushion near back frame handgrips and slide up and off.
To replace: Reverse procedure.
Strap
SEAT-LEG CUSHION
To remove: Release the two elastic straps which hold the cushion to the back frame with small wire rings (See fig. 10).
Adjust the chair into the
Flip the seat cushion forward and release the two hooks which hold the cushion to legrest frame.
Slide the cushion downward and forward.
To replace: Reverse procedure.
ARM PANELS
To remove: Grip the steel rod at the bottom of the side panel, located near the front of the side frame. Gently slide the rod backward. Flex the rod slightly until it disengages (See fig. 12).
Detach the four screws from under the side frame arm plate.
To replace: Reverse procedure.
565G/565PG/565WG | 7 |