Figure 7
Figure 8
Figure 9
CORRECT SEAT POSITIONING
OCCUPANT OPERATED
To recline, place hands on armrests and lean against the back until the desired position is obtained (See fig. 7).
To return to seated position, place hands on armrests and lean forward while pressing legs down against the legrest.
ATTENDANT OPERATED
Release the recliners position stop.
Use handgrip to adjust recliner to desired position.
Engage recliner stop.
OPERATION OF THE POSITION MECHANISM
NOTE: Casters must be locked.
1.To hold recliner in any position, rotate handle to point up (See fig. 8).
2.To release position mechanism, turn the handle to point down (See fig. 9).
NOTE: The position mechanism is factory set. If the position mechanism does not hold, follow Adjustment instructions for the position mechanism. The plate has 5 position marks for repeatable positions (See fig. 13).
6 | 565G/565PG/565WG |