ADJUSTING THE INFINITY LOBACK | PROCEDURE 4 |
ADJUSTING THE ANGLE (FIGURE 4)
NOTE: Refer to the INSTALLATION AND STABILITY WARNINGS in the SAFETY SUMMARY of this manual.
1.Remove the back cushion from the back panel. Re- fer to INSTALLING/REMOVING THE BACK CUSH- ION in PROCEDURE 2 of the manual.
2.Loosen the two (2) mounting screws on the two (2) angle brackets.
3.While standing behind the wheelchair, perform one
(1) of the following:
A.ToINCREASEtheangleoftheInfinityLoBack,grasp the TOP of the Infinity LoBack and pull BACK.
NOTE: Modesty flap and fixed flap not shown for clarity.
B.To DECREASE the angle of the Infinity LoBack, grasp the TOP of the Infinity Loback and push
FORWARD.
4.Torque the two (2) nuts on the two (2) angle brackets to
5.Reinstall the back cushion onto the back panel. Re- fer to INSTALLING/REMOVING THE BACK CUSH- ION in PROCEDURE 2 of the manual.
ADJUSTING THE LATERAL
SUPPORTS
NOTE: Refer to the INSTALLATION AND STABILITY WARNINGS in the SAFETY SUMMARY of this manual.
A D J U S T I N G
T H E
L O B A C K
TO DE-
CREASE
ANGLE:
Grasp Here
and Push
FORWARD
Mounting
Screw
TO DE-
CREASE
ANGLE:
Grasp Here
and Push
FORWARD
TO INCREASE
ANGLE:
Grasp Here
and Pull
BACK
Angle Bracket
SIDE VIEW
TO INCREASE
ANGLE:
Grasp Here
and Pull
BACK
Adjusting the Width (Figure 5)
1.Remove the back cushion from the back panel. Re- fer to INSTALLING/REMOVING THE BACK CUSH- ION in PROCEDURE 2 of the manual.
2.Loosen, but DO NOT remove the two (2) mounting screws that secure the lateral support to the back panel.
3.Position the user in the wheelchair.
4.Slide one (1) lateral support to the desired location.
5.Torque the two (2) mounting screws that secure the lateral support to the back panel to
6.Repeat STEPS
7.Reinstall the back cushion onto the back panel. Re- fer to INSTALLING/REMOVING THE BACK CUSH- ION in PROCEDURE 2 of the manual.
Back Panel
Slide Lateral
Support to the
Desired Location
Lateral
Support
Mounting
Screws
FIGURE 4 - ADJUSTING THE ANGLE
NOTE: Modesty flap and fixed flap not shown for clarity.
FIGURE 5 - ADJUSTING THE WIDTH
13