IMPORTANT INFORMATION/INSTALLATION/ADJUSTMENT OVERVIEW
IMPORTANT INFORMATION
The best way to avoid problems related to pressure sores | All cushions should be selected carefully. Working with |
is to understand their causes and your role in a skin man- | your therapist, physician and equipment supplier is the |
agement program. | best way to assure that a cushion choice matches your |
Your therapist and physician should be consulted if you | individual needs. |
| |
have any questions regarding weight relief, | As the needs of the client become more complex, the |
nation of skin, or individual limitations and needs. | cushion evaluation becomes more important. |
INSTALLATION/ADJUSTMENT OVERVIEW
INSTALLATION/ADJUSTMENT OVERVIEW (FIGURE 1)
WARNING
For proper installation of the Infinity LoBack and to reduce the risk of pressure sores, the adjustment procedures in this manual MUST be performed in the following order:
1. | Adjusting the Mounting Hardware/Height | 3. | Adjusting the Angle |
2. | Adjusting the Depth Hardware | 4. | Adjusting the Lateral Supports |
I
N
F
O R M A T I O N
Follow the steps below in order. Refer to the procedure below each step.
STEP 2
Install/remove the lateral
supports. Refer to INSTALLING/
REMOVING THE
LATERAL SUPPORTS in
PROCEDURE 2 of this manual.
STEP 7
Adjust the angle. Refer to ADJUST- ING ANGLE in PROCEDURE 4 of this manual.
STEP 1
Install the cane clamps onto the wheelchair. Refer to
INSTALLING/
STEP 8
Adjust the lateral supports. Refer to ADJUSTING THE LATERAL SUPPORTS in PROCEDURE 4 of this manual.
STEP 3
Install the back cushion. Refer to INSTALLING/REMOVING THE BACK CUSHION in
PROCEDURE 2
of this manual.
STEP 4
Install the Infinity LoBack.
Refer to INSTALLING/
REMOVING THE INFIN-
ITY LOBACK in PROCE-
DURE 3 of this manual.
STEP 6
Adjust the depth of the Infinity LoBack. Refer to ADJUSTING THE DEPTH HARDWARE in PROCEDURE 4 of this manual.
O
V
E
R
V
I
E
W
REMOVING CANE CLAMPS in PRO- CEDURE 1 of this manual.
STEP 5
Adjust the height of the Infinity LoBack. Refer to ADJUSTING THE MOUNTING HARDWARE/ HEIGHT in PROCEDURE 4 of this manual.
FIGURE 1 - INSTALLATION/ADJUSTMENT OVERVIEW
5