Braun L955 manual Latch Roll Stops

Page 19

Pre-Lift Operation Notes and Details

Outboard Roll Stop: When the platform lowers fully to ground level, the roll stop cylinder compression spring automati- cally unfolds (rotates) the roll stop to the ramp position (fully unfolded). See photos A and B. Although the outboard roll stop is lift-powered, the activation of

the roll stop is controlled by the lift operator. Activating either DOWN switch unfolds the roll stop. The roll stop is cylinder- powered to automatically fold (rotate) to the vertical position when the UP switch is activated (roll stop raises before platform raises).

Side Entry Roll Stop: When the platform lowers fully to ground level, the spring-loaded side entry roll stop unfolds (rotates) to the ramp position simultaneously with the out- board roll stop (when DOWN switch is activated). See photos A and B. The belt and chain

Fully-Unfolded (Ramp position) Roll Stops

B

Disengaged

Fully-Folded

Roll Stop

(Up-vertical)

 

Latch

Roll Stops

L955U: The roll stop latch is on opposite side of the platform.

Note: The platform must raise approximately two inches before the latch engages fully.

Fully-Engaged Roll Stop Latch

C

2"

Latch Foot

Page 17

Image 19
Contents 3ERIES  Congratulations Contents Rear Lift TerminologyLift Components IntroductionLift Terminology Position when the Down switch is pressed Lift Terminology Safety Symbols Safety FIRST! Know That Lift Operation SafetyLift Operation Safety Precautions Lift Operation Safety Lift Operation Safety Lift Operation Safety Lift Pre-Lift Operation Notes and DetailsPump Module Control Switches The lift-mounted Control SwitchesBraun Corporation After- market Control Systems Policy DownLift Features Pre-Lift Operation Notes and Details Latch Roll Stops Outboard Roll Stop and Roll Stop Latch Operation The lift Pre-Lift Operation Notes and Details Lift Passengers Wheelchair-Equipped Occupant Seat Belts Operation Procedure ReviewPreventive Maintenance Pre-Lift Operation Notes and Details Lift Operating Instructions To Open Doors To Unload Passenger Unlock wheelchair brakes and unload passenger from platform To Load Passenger To Fold Platform To Close Doors Manual Operating Instructions Follow all Lift Operation Safety PrecautionsTo Lower Platform Down To Unfold Roll Stop To Unfold Platform OutTo Raise Platform To Fold Roll StopTo Fold Platform Lift is only as safe as Decals and AntiskidAvailable Antiskid AntiskidMaintenance and Lubrication Roll Stop Latch Pivot and slide points Series No Pump Code Model No Serial No Warranty and Registration InstructionsWarranty and Registration Instructions Providing Access to the World Anual