M
O
UP
Lift Operating Instructions
To Load Passenger:
1. Load passenger onto platform facing outward and lock wheel- chair brakes.
Note: Roll stops must be fully unfolded (ramp position) until the entire wheelchair has crossed the roll stop. See Photos K and L.
2.Press red UP switch until platform stops (reaches floor level). Re- lease switch.
Handrail Switch: Slide knob out to
UP position.
Note: Roll stops must be UP and |
|
roll stop latch must be fully en- |
|
gaged before raising platform. |
|
Platform will raise above ground |
|
level approximately two inches | approximately 2" |
before latch engages fully. |
N
P
Page 28