Braun L955 manual Pre-Lift Operation Notes and Details

Page 21

Pre-Lift Operation Notes and Details

operator must activate the DOWN switch to lower the platform fully to the ground. The lift operator or attendant must view the platform as it lowers to be certain the entire platform reaches and rests safely on the ground. Stop activating the DOWN switch if any portion of the platform is obstructed while descending or the platform does not reach ground level for any reason (contact with an obstruc- tion, mechanical failure, exceed- ing the lift “floor-to-ground” capacity, etc.).

After the platform is fully lowered (platform reaches the ground), the lift operator should continue to press the DOWN switch to

unfold the outboard roll stop and the side entry roll stop fully (ramp position). Note: The roll stops must be fully unfolded until the entire wheelchair has crossed the roll stops when loading or unloading at ground level. Discontinue lift opera- tion immediately if the roll stops or latch do not operate properly.

Bridging: The L955SE incorpo- rates a bridging feature. This feature stops the down travel of the platform if the outboard end of the platform contacts a raised surface (such as a curb), pre- venting the operator from lower- ing the inboard end of the platform.

Handrails: Dual handrails are provided for wheelchair passen- ger (or standee) use. The handrails automatically unfold to the deployed position when the platform unfolds and fold auto- matically to the stowed position when the platform folds. The passenger may choose to grip the handrails when on the lift platform (if applicable).

Note: The right (front) handrail is equipped with an UP/DOWN control switch (details in Control Switches section). Discontinue lift operation immediately if the handrails do not operate properly.

Page 19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 3ERIES  Congratulations Contents Rear Lift TerminologyLift Components IntroductionLift Terminology Position when the Down switch is pressed Lift Terminology Safety Symbols Safety FIRST! Know That Lift Operation SafetyLift Operation Safety Precautions Lift Operation Safety Lift Operation Safety Lift Operation Safety Lift Pre-Lift Operation Notes and DetailsPump Module Control Switches The lift-mounted Control SwitchesBraun Corporation After- market Control Systems Policy DownLift Features Pre-Lift Operation Notes and Details Latch Roll Stops Outboard Roll Stop and Roll Stop Latch Operation The lift Pre-Lift Operation Notes and Details Lift Passengers Wheelchair-Equipped Occupant Seat Belts Operation Procedure ReviewPreventive Maintenance Pre-Lift Operation Notes and Details Lift Operating Instructions To Open Doors To Unload Passenger Unlock wheelchair brakes and unload passenger from platform To Load Passenger To Fold Platform To Close Doors Manual Operating Instructions Follow all Lift Operation Safety PrecautionsTo Lower Platform Down To Unfold Roll Stop To Unfold Platform OutTo Fold Roll Stop To Raise PlatformTo Fold Platform Lift is only as safe as Decals and AntiskidAvailable Antiskid AntiskidMaintenance and Lubrication Roll Stop Latch Pivot and slide points Series No Pump Code Model No Serial No Warranty and Registration InstructionsWarranty and Registration Instructions Providing Access to the World Anual
Top Page Image Contents