E&J 3E01-INS-LAB-REVB08 manual Adjust footplate extension length 1. See picture at right

Page 16

Adjust footplate extension length 1. See picture at right.

Loosen knob to free footplate extension inside hanger.

2.Press down on the lock- ing button and adjust the footplate to the desired length. Ensure that the locking button is completely extended and securely fastened in the adjustment hole.

3.Tighten knob to secure footplate extension inside hanger.

4.Repeat steps 1-3 for the other footplate exten- sion.

locking

button

hanger

adjustment holes

knob footplate

footplate extension,

adjust length

5.Ensure that both footplate extensions are securely fastened and that minimum ground clearance is 2-1/2 inches.

WARNING: Ensure that footplates are securely fastened before occupying or operating wheelchair.

16	3E01-INS-LAB-RevB08, December 2008 • Traveler SE Owner’s Manual

Image 16

Contents Manual Wheelchair Contents Introduction Page Important safety precautions Page Page Getting started Balance Handling tipsTransfer Activities Forward or sideward Reaching / bendingBackward Ascent Ramps And InclinesDescent Curbs and steps Adjustments Rear wheels & castersArms Install armRemove arm Footrest-detachable, swingaway Remove footrest Front RiggingAttach footrest Adjust footplate extension length 1. See picture at right Loosen knob to free footplate extension inside hangerAttach elevating legrest WardAdjust elevating legrest panel position Adjust legrest elevationAdjust legrest footplate extension length Crossbraces Tighten crossbracesAdjust wheel locks Wheel locksTransporting the Traveler SE Reassembly Maintenance Do-it-yourself maintenanceList of tools General careCheck tire wear Check handrimsCheck wheel lock engagement Check anti-tippers optionalCheck rear wheel adjustment Check upholsteryCheck arms Check backposts / push handlesCleaning your Traveler SE Check footrests & elevating legrestsCheck casters Check wheel bearingsTroubleshooting SymptomLimited warranty Traveler SE Manual WheelchairPage Index