E&J 3E01-INS-LAB-REVB08 manual Reassembly

Page 22

Reassembly

1. Push down with even pressure on seat tubes on both sides.

WARNING: Do not place your hand between seat tube and side panel.

2.Attach footrests or legrests to wheelchair.

3.Reinstall the seat cushion, if so equipped.

WARNING: When reassembling the wheelchair, ensure that seat frame has been opened completely. If not, wheelchair is unsafe to occupy.

WARNING: Ensure that footrests or legrests are locked in place before occupying or operating wheelchair.

22	3E01-INS-LAB-RevB08, December 2008 • Traveler SE Owner’s Manual

Image 22

Contents Manual Wheelchair Contents Introduction Page Important safety precautions Page Page Getting started Balance Handling tipsTransfer Activities Forward or sideward Reaching / bendingBackward Ascent Ramps And InclinesDescent Curbs and steps Adjustments Rear wheels & castersArms Install armRemove arm Footrest-detachable, swingaway Remove footrest Front RiggingAttach footrest Adjust footplate extension length 1. See picture at right Loosen knob to free footplate extension inside hangerAttach elevating legrest WardAdjust elevating legrest panel position Adjust legrest elevationAdjust legrest footplate extension length Crossbraces Tighten crossbracesAdjust wheel locks Wheel locksTransporting the Traveler SE Reassembly Maintenance Do-it-yourself maintenanceList of tools General careCheck wheel lock engagement Check tire wearCheck handrims Check anti-tippers optionalCheck arms Check rear wheel adjustmentCheck upholstery Check backposts / push handlesCheck casters Cleaning your Traveler SECheck footrests & elevating legrests Check wheel bearingsTroubleshooting SymptomLimited warranty Traveler SE Manual WheelchairPage Index