E&J 3E01-INS-LAB-REVB08 manual Crossbraces, Tighten crossbraces

Page 19

Crossbraces

Tighten crossbraces

M13 wrench, M6 hex key

Check the crossbraces to ensure that the bolt and nut securing both crossbraces in the center of the wheelchair are secure (crossbraces should be loose enough to fold easily, yet snug enough to take up excess play). Use a M13 wrench and M6 hex key to tighten.

3E01-INS-LAB-RevB08, December 2008 • Traveler SE Owner’s Manual

Image 19

Contents Manual Wheelchair Contents Introduction Page Important safety precautions Page Page Getting started Balance Handling tipsTransfer Activities Forward or sideward Reaching / bendingBackward Ascent Ramps And InclinesDescent Curbs and steps Rear wheels & casters AdjustmentsArms Install armRemove arm Footrest-detachable, swingaway Remove footrest Front RiggingAttach footrest Loosen knob to free footplate extension inside hanger Adjust footplate extension length 1. See picture at rightWard Attach elevating legrestAdjust elevating legrest panel position Adjust legrest elevationAdjust legrest footplate extension length Tighten crossbraces CrossbracesWheel locks Adjust wheel locksTransporting the Traveler SE Reassembly Do-it-yourself maintenance MaintenanceGeneral care List of toolsCheck anti-tippers optional Check tire wearCheck handrims Check wheel lock engagementCheck backposts / push handles Check rear wheel adjustmentCheck upholstery Check armsCheck wheel bearings Cleaning your Traveler SECheck footrests & elevating legrests Check castersSymptom TroubleshootingTraveler SE Manual Wheelchair Limited warrantyPage Index