E&J 3J01-INS-LAB-RevB13 manual Install Anti-Theft Pole

Page 15

Install Anti-Theft Pole

M10 wrench, M4 hex key

1.Attach upper pole section to lower pole section using the included M6 bolt and nut as shown at right.

2.Use an M10 wrench and M4 hex key to tighten.

3.Attach the pole assembly to the wheel lock bracket using M6 bolt and nut as shown at right.

4.Use an M10 wrench and M4 hex key to tighten.

upper anti-theft pole

nut

bolt

lower anti-theft pole

attach upper and lower

anti-theft poles

wheel lock bracket bolt

nut

install anti-theft pole

3J01-INS-LAB-RevB13 • Traveler HTC User Manual

15

Image 15

Contents Hospital Transport Chair Manual Wheelchair Contents Introduction Page Important Safety Precautions Page Page Getting Started Handling Tips BalanceTransfer Activities Reaching / Bending Forward or sidewardBackward Ramps and Inclines AscentDescent Curbs and Steps Assembly AssemblyUnpacking Install Anti-Tippers Install Push Handle / Anti-Fold BarInstall Anti-Theft Pole Install Elevating Legrests or Optional Footrests Rear Wheels & Casters AdjustmentsRemove Arm Install ArmElevating LEGREST, Swingaway Remove Elevating Legrest Or Optional FootrestAttach Elevating Legrest or Optional Footrest Adjust Legrest Elevation Raise elevating legrestLower elevating legrest See picture at right Tighten Crossbraces Adjust Wheel LocksDo-It-Yourself Maintenance MaintenanceGeneral Care List of ToolsCheck Anti-Tippers Check Tire WearCheck Handrims Check Wheel Lock EngagementCheck Elevating Legrests and Optional Footrests Check Rear Wheel AdjustmentCheck Arms Check Backposts / Push HandleCleaning your Traveler HTC Check CastersCheck Wheel Bearings Symptom TroubleshootingScope of Warranty Limited WarrantyPage Index