E&J 3J01-INS-LAB-RevB13 manual See picture at right

Page 21

Adjust Footplate Extension Length (Elevating Legrest or Optional Footrest)

1.	See picture at right.
	Loosen latch to free
	footplate extension
	inside hanger.
2.	Press down on the
	locking button and
	adjust the footplate
	to the desired length.
	Ensure the locking
	button is completely
	extended and
	securely fastened in
	the adjustment hole.
3.	Fasten latch to secure
	footplate extension
	inside hanger.
4.	Repeat steps 1-3 for

locking button

adjustment holes

latch

footplate

hanger

the other footplate

extension.

elevating legrest

footplate extension,

adjust length

5.Ensure both footplate extensions are

securely fastened and minimum ground clearance is 2 1/2 inches.

WARNING: Ensure footplates are securely fastened before occupying or operating wheelchair.

3J01-INS-LAB-RevB13 • Traveler HTC User Manual

21

Image 21

Contents Hospital Transport Chair Manual Wheelchair Contents Introduction Page Important Safety Precautions Page Page Getting Started Handling Tips BalanceTransfer Activities Reaching / Bending Forward or sidewardBackward Ramps and Inclines AscentDescent Curbs and Steps Assembly AssemblyUnpacking Install Anti-Tippers Install Push Handle / Anti-Fold BarInstall Anti-Theft Pole Install Elevating Legrests or Optional Footrests Rear Wheels & Casters AdjustmentsRemove Arm Install ArmElevating LEGREST, Swingaway Remove Elevating Legrest Or Optional FootrestAttach Elevating Legrest or Optional Footrest Adjust Legrest Elevation Raise elevating legrestLower elevating legrest See picture at right Tighten Crossbraces Adjust Wheel LocksDo-It-Yourself Maintenance MaintenanceGeneral Care List of ToolsCheck Handrims Check Tire WearCheck Wheel Lock Engagement Check Anti-TippersCheck Arms Check Rear Wheel AdjustmentCheck Backposts / Push Handle Check Elevating Legrests and Optional FootrestsCleaning your Traveler HTC Check CastersCheck Wheel Bearings Symptom TroubleshootingScope of Warranty Limited WarrantyPage Index