Connect the power supply

Installation

If you are using a U-space for cable routing, use a brush guard panel to reduce air loss through the opening.

Note

1.Using one of the supplied power cords, connect the female end to one of the input sockets on the rear of the unit. Plug the male end into the UPS or other socket that provides protected power.

Input A: Primary Input B: Alternate

Fan 1

Front

Input:	Off
200-240 VAC
50/60 Hz
0.75A	On

	Fan 2
	Back
Push to Reset	Off
	Off
Automatic
Switch	885-0476

2.To provide redundant power to the unit, use the remaining socket to connect to a second source of protected power.

3.You may bundle and tie-wrap the cords to provide clearance for other components.

12	Rack Side Air Distribution Unit