Uniden XS1455/1455+1 owner manual Direct wall mounting, 3mm 100mm 35mm

Page 13

Direct wall mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Try to mount your phone within 1.5m of a working phone jack to avoid excessive cord lengths.

Make sure the wall material is capable of supporting the weight of the base and handset. Use #10 screws (minimum length of 35mm) with anchoring devices suitable for the wall material where the base unit will be placed.

1)Insert two mounting screws into the wall (with their appropriate anchoring device), 100mm apart. Allow about 3mm between the wall and screw heads for mounting the phone.

2)Refer to steps 1 through 7 on page 11 to mount the telephone.

3mm

100mm

35mm

12

XS1455+1 OM.indd 12

24/6/08 1:36:04 PM

Image 13

Contents XS1455/1455+1 Contents Welcome Manual Conventions TerminologyProduct Overview Main Phone FeaturesXS1455+1 Handset Controls and FunctionsExtra Charging Cradle XS1455+1 only Main Base UnitChoosing the Best Location Installing the PhoneInstalling the Rechargeable Battery Packs into the Handsets Installing the Base Unit and Charging Cradle XS1455+1 OM.indd 24/6/08 13600 PM Standard wall plate mounting Mounting the Base Unit on a Wall3mm 100mm 35mm Direct wall mountingXS1455+1 OM.indd 24/6/08 13604 PM When to Re-register Handsets XS1455+1 only Activating AutoTalk Basic SetupActivating Caller ID on Call Waiting Handset No.1 only Setting Name Tag POP IDSetting Insert Using the Speed Dial Memory Storing a Name and Number in Memory Number of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Making and Receiving Calls Using Your PhoneMaking a Call from Speed Dial Memory Making a Call from the Caller ID List To cancel speed dialingXS1455 To transfer a call Transferring a Call XS1455+1 onlyTo receive a transfer call Adjusting the Earpiece Volume Selecting the Ring Tone and VolumeRedialing the Last Dialed Number Temporarily Mute RingerSelecting a Different Channel Using Call WaitingFind Handset Unknown Name Caller ID and Cidcw Caller ID on Call WaitingViewing the Caller ID Message List Caller ID on Call Waiting CidcwDeleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Integrated Answering Machine FeaturesAnswering Machine Setting Setting Up Your Answering MachineSetting the Time Setting a Personal Security Code PIN Selecting the Message Record Time Setting the Ring TimeSetting the Message Alert Tone Preset message Setting Your Outgoing Message GreetingChoosing between the two outgoing messages Recording a personal outgoing message GreetingAdjusting the Speaker Volume Level Setting the Base Ringer VolumeTemporarily Mute the Base Ringer and Call Screen Turning the Answering Machine On/Off Using Your Answering MachineMessages Reviewing MessagesDay it was received Remote access with the handset XS1455 only Remote Operation Voice MemoXS1455+1 OM.indd 24/6/08 13638 PM Turn on the Answering Machine Remotely Changing the Digital Security Code Specifications MaintenancePower Failure Talk and Standby Times Cleaning the battery charging contacts Battery replacement and handlingCommon Issues TroubleshootingSymptom Suggestion Charge/in use LED or Traveling Out-of-RangeSymptom Suggestion Call was answered before the second ring Adjust the speaker volume on the base unit Handset Base Liquid DamageF, G, H, I, J, K, L IndexO, P, Q X, Y, ZMemo Memo Memo Memory Location Memo Remote Operation CardTask Key Element of Warranty One Year Limited WarrantyUniden Australia Pty Limited/Uniden New Zealand Limited