Uniden XS1455/1455+1 owner manual When to Re-register Handsets XS1455+1 only

Page 15

When to Re-register Handsets (XS1455+1 only)

In some cases, it may be necessary to re-register your handsets. To re-register your handsets, please follow registration steps outlined on page 13.

Re-registration is required in the following scenarios:

1)You’ll need to re-register both handsets (follow steps on page 13) each time the digital security code is changed. (Refer to page 47 for details regarding the Digital Security Code.)

2)When there is a power failure for more than one hour: If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a move), both handsets will need to be re-registered. To re-register, follow the same registration process on page 13.

3)If any handset’s battery becomes very low, the handset must be recharged for 15 - 20 hours and re-registered to the main base unit.

4)In any circumstance in which you experience difficulty connecting to the main base to place or receive calls, the handset should be re-registered.

Note: Make sure to return the handsets to the cradles after each phone call.

14

XS1455+1 OM.indd 14

24/6/08 1:36:05 PM

Image 15

Contents XS1455/1455+1 Contents Welcome Manual Conventions TerminologyProduct Overview Main Phone FeaturesXS1455+1 Handset Controls and FunctionsExtra Charging Cradle XS1455+1 only Main Base UnitChoosing the Best Location Installing the PhoneInstalling the Rechargeable Battery Packs into the Handsets Installing the Base Unit and Charging Cradle XS1455+1 OM.indd 24/6/08 13600 PM Standard wall plate mounting Mounting the Base Unit on a Wall3mm 100mm 35mm Direct wall mountingXS1455+1 OM.indd 24/6/08 13604 PM When to Re-register Handsets XS1455+1 only Activating AutoTalk Basic SetupActivating Caller ID on Call Waiting Handset No.1 only Setting Name Tag POP IDSetting Insert Using the Speed Dial Memory Storing a Name and Number in Memory Number of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Using Your Phone Making and Receiving CallsMaking a Call from Speed Dial Memory To cancel speed dialing Making a Call from the Caller ID ListXS1455 Transferring a Call XS1455+1 only To transfer a callTo receive a transfer call Temporarily Mute Ringer Selecting the Ring Tone and VolumeAdjusting the Earpiece Volume Redialing the Last Dialed NumberSelecting a Different Channel Using Call WaitingFind Handset Unknown Name Caller ID and Cidcw Caller ID on Call WaitingViewing the Caller ID Message List Caller ID on Call Waiting CidcwDeleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Integrated Answering Machine FeaturesAnswering Machine Setting Setting Up Your Answering MachineSetting the Time Setting a Personal Security Code PIN Selecting the Message Record Time Setting the Ring TimeSetting the Message Alert Tone Preset message Setting Your Outgoing Message GreetingChoosing between the two outgoing messages Recording a personal outgoing message GreetingSetting the Base Ringer Volume Adjusting the Speaker Volume LevelTemporarily Mute the Base Ringer and Call Screen Turning the Answering Machine On/Off Using Your Answering MachineReviewing Messages MessagesDay it was received Remote access with the handset XS1455 only Remote Operation Voice MemoXS1455+1 OM.indd 24/6/08 13638 PM Turn on the Answering Machine Remotely Changing the Digital Security Code Maintenance SpecificationsPower Failure Talk and Standby Times Cleaning the battery charging contacts Battery replacement and handlingTraveling Out-of-Range TroubleshootingCommon Issues Symptom Suggestion Charge/in use LED orSymptom Suggestion Call was answered before the second ring Adjust the speaker volume on the base unit Handset Base Liquid DamageX, Y, Z IndexF, G, H, I, J, K, L O, P, QMemo Memo Memo Memory Location Memo Remote Operation CardTask Key Element of Warranty One Year Limited WarrantyUniden Australia Pty Limited/Uniden New Zealand Limited