Talking | Motorola XU2100, XV1100, XV2100, XU2600 manual

Keypad Lock

1.To maintain settings and lock keypad, press and hold \for three seconds.

2.To unlock, press and hold \for three seconds.

Hands-Free Use/VOX

Motorola XTN radios can operate hands-free (VOX) when used with compatible VOX accessories. A short delay occurs between when you start talking and the radio transmits.

With Compatible VOX Accessories

1.Turn radio off.

2.Open accessory cover.

3. Insert plug of audio accessory firmly into accessory jack.

4. Turn radio on. Radio displays: g. If flashing and for initial use, please refer to "Setting Vox Sensitivity" on page 28.

5. Lower radio volume BEFORE placing accessory near ear.

6. To transmit, speak into accessory microphone and to receive, stop talking.

7. You can disable VOX operation by pressing Mor removing the audio accessory.

Note: To order accessories, refer to: www.motorola.com/radios/professional, call 1 (800) 448-6686, or contact your point of purchase.

Talking and Receiving

Receiving

Without Accessories

You can operate the Motorola XU2600 and XV2600 radios hands-free without a VOX accessory.

1.Enable VOX by pressing M while turning the radio on. g displays.

2.You can disable VOX operation temporarily by pressing M, g will flash.

3.A short press of M will re-enable VOX.

4.To disable VOX, turn radio off then back on.

Setting VOX Sensitivity

You can adjust the sensitivity of your radio’s accessory or microphone during VOX operation (XU2600 and XV2600) to suit different operating environments. These menus appear only if the VOX feature is in use, which is indicated by g.

1. Press \until g appears. The radio also displays which VOX sensitivity you are

Talking and

setting:

H = External VOX (with audio accessory)

I = Internal VOX (without accessory; XU2600 and XV2600 only)

2.Press [ or ] to select the sensitivity level.

0 = Off (VOX with accessories only, default settings)

1 = Low sensitivity

2 = Medium sensitivity

3 = High sensitivity

External VOX