2
2 Description
2.1
Power Supply Unit C1-PS 60i
The power supply unit
Front view
6
1 | 2 | 3 | 4 | 5 | 7 |
1Daisy chain socket
Minicon socket connecting the consoles via bus cables.
5Power LED
Illuminates when the unit is switched on with the power switch.
2Audio input
The ON/OFF button activates the audio input on the rear of the unit. The UP/DOWN buttons adjust the input level, which is indicated by the LEDs. The signal and peak LEDs illuminate to indicate the status of the audio input level.
6Protect LED
During normal operation, this illuminates when you power on the unit, then goes out when the system is ready. It also illuminates if there is a fault in the power supply unit, or if there are too many consoles connected to the system.
3 Audio output | 7 Power switch |
The ON/OFF button activates the audio output on the rear of the unit. The UP/DOWN buttons adjust signal level output from the conference system. The signal and peak LEDs illuminate to indicate the status of the audio output level.
Use this button to turn the unit on or off.
4Monitor section
1/4” headphone output with volume control. Press the volume knob to toggle between monitoring the audio input and output. The LEDs illuminate to indicate which source you are currently monitoring.
3 | English |