Place the battery pack in the battery compartment.
INSTALLATION
CHARGING THE BATTERY PACK
It is important to charge the battery for 12 to 16 hours continuously without any interruption before you use the handset for the first time.
Preparation
Red Black
IN USE/
CHARGE
Charging contacts LED
1 Remove the battery cover on the back of the handset by sliding it down.
2 Plug the battery pack cord into the connector with the correct polarity. (black and red wires).
3
4 Put the battery cover back by sliding until it snaps into place. Make sure not to get the wires of the battery pack caught in the cover.
5 Place the handset on the base unit. Be sure the IN USE/CHARGE LED lights.
If the IN USE/CHARGE LED does not light, make sure the AC adaptor is plugged in securely.
12