Toshiba FT-8801A manual Quick

FLASH .

QUICK

REFERENCE CALLER ID CORDLESS TELEPHONE

SETTING / USING THE PHONE

CALLER ID SERVICE

GUIDE

FT-8801A

Setting The Dial Mode

Depending on your dialing system, set the mode as follows:

Setting Up Caller ID

To use Caller ID/ Caller ID on Call Waiting features, you must subscribe to both Caller

Making a Call with Caller ID Data

1 Press CID , then press or to display the number you want to dial.

Read the Owner’s Manual for details.

SETTING UP THE BASE UNIT

Raise the antenna to vertical position.

		Single-Line
Fasten the AC	Telephone Line Cord	Telephone Jack
		(RJ11C)
adaptor cord.
		Power Outlet
		(AC 120V, 60Hz)
	AC Adaptor

NOTE: Plug the AC adaptor firmly into the base unit and the AC 120V outlet.

CHARGING THE BATTERY PACK

Red	Black	1	Remove the battery cover by sliding it down.
		2	Plug the battery pack cord into its socket, observing
			the correct polarity.

1	Press and hold	FLASH until you hear a confirmation tone.
2	To set the dial mode for pulse dialing, press # / PULSE . Or to set the dial
	mode for tone dialing press TONE/			.
	A confirmation tone sounds to indicate the setting is complete.
	Dial Mode:Pulse		Dial Mode:Tone
	Tone - Press		Tone - Press
	Pulse- Press #		Pulse- Press #
TONE/		# / PULSE
	Tone Dialing		Pulse Dialing

Area Code

1	Press	FUNC , then press	3 .
2	Press	SELECT and enter a 3-digit area code.
3	Press	SELECT , then press	FUNC .	FLASH

Making a Call TALK

ID / Caller ID on Call Waiting services provided by your local telephone company.

	,
TALK	FLASH
SELECT	CID
1	3

2 Press TALK , then displayed number will be dialed.

Note: For long distance calls, you need a prefix “1” and the area code. Press L.D./1 and LOCAL/3 to add or cancel “1” and the area code before pressing TALK .

Storing Caller ID Data to Speed-Dial Memory

1	Press	CID , then press	or	to display the number you want to store into
	Speed-dial memory.
2	Press	MEM , then press	,	or enter a memory location number.
3	Press	SELECT . A confirmation beep sounds and the Caller ID data is stored.
	Press	CID to return to standby mode.

Deleting Caller ID Data

1	Press	CID , then press	or		to display the Caller ID number you want to
	delete from the memory.
2	Press	DELETE , then press		or	to select Yes or No.
3	Press SELECT or DELETE .
4	Press	CID to return to standby mode.

3	Place the battery pack . Then close the battery
4	compartment cover.
	Place the handset on the base unit. You can place
	the handset with the dialpad facing up or down.

1 Dial the phone number .

2 Press TALK .

3 Press TALK to hang up .

SELECT 3

TONE/ # / PULSE

FUNC

MEM

DELETE

Caller ID on Call Waiting

1 Before answering a call, check to see that the caller’s name and telephone number

		IMPORTANT
		Charge the battery pack for at least 12 to 16 hours.
	IN USE/
Charging contacts	CHARGE
	LED
UCZZ69338BZ	RC012154	Printed in China

Answering a Call

Press TALK and speak.

NOTE: To indicate Caller ID data, let the phone ring twice before you answer the call.

are displayed on the LCD. To switch to the other line, press

The first caller is put on hold.

2 To return to the first caller, press FLASH again.

For more detailed instructions and examples, please refer to the owner’s manual.