Which Codes Do I Use?

Default feature codes are listed in this guide. Check with your System Administrator to see if these codes have been changed. If so, write the new codes in the blank lines and cross out the default codes. For example:

Cnf/Trn + #46 or

Making a Call

Hot Dialing

1.To make a call using Hot Dialing, dial the number.

2.When connected, you can continue speakerphone operation or lift the handset and continue the conversation.

Spkr Button

1.To make a call, press Spkr.

2.Dial the number.

3.When connected, you can continue to use the speakerphone or lift the handset and continue the conversation.

Handset

1.To make a call, lift the handset, then dial the number.

2.When connected, you can continue to use the handset or switch to speakerphone by holding down Spkr and replacing the handset.

Dial Directory

1.Press SK1 or Mode from your telephone (shown right). The Select Directory menu appears.

Note The soft keys on the

Select Directory are:

My = Personal SD Names

EXTR= Sys. SD Names INTR = Directory No. Names Dial = Cancel directory, get dial tone.

2.Press the appropriate soft key

and use the dial pad to enter the first character of the name

...or if you do not select a directory, you can go directly to the dial pad and enter a character. This makes names from all directories available.

3.Press Find soft key to start the Dial-directory search.

4.Press Next soft key to go through the directory until you see the name.

5.Press Call soft key to call.

6.Press Back soft key to go back through the directory.

Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05