Handsfree Answerback

!To receive a hands free internal call over the speakerphone

1.You hear a single long tone, then the caller’s voice. Do not lift the handset; speak toward the telephone in a normal voice.

2.Press Spkr or take the handset off-hook if you wish to transfer the call or place it on hold.

!To switch between Handset and Speakerphone

! Press Spkr and place the handset on-hook to switch from Handset to Speakerphone mode.

Account Code Calls

!To dial with a Forced Account Code (FAC)

1.Place a call in the normal method.

2.After the tone burst, enter the Account Code.

If the code is invalid, you hear re-order tone and the call is rejected.

!To use an Emergency Override of an FAC

You can bypass Forced Account Code requirements with three emergency numbers, including 911. See your System Administrator for these numbers: ____________

!To dial with Voluntary Account Codes

1.After accessing a CO line, press Account Code

...or Cnf/Trn + #46 ________.

You can enter it at any time during a call.

2.Enter the Account Code.

You should hear confirmation tone if the code is valid or two short tones if it is invalid.

3.Dial a telephone number if you entered the code after accessing an outside line or resume talking or hang up if you entered the code after the call.

Call Transfer

1.While on a call, press Cnf/Trn.

2.Dial the extension and announce the call or “blind transfer” (hang up).

During call transfer, you can reconnect to the original caller by pressing your flashing extension button.

3.Camp on to a busy station: If the station is busy, hang up. The called station receives a tone. Once the busy line is free, the transferred line is called back.

4 Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05