Mitel 5010 manual Tips for Your Comfort and Safety, For Users on Resilient 3300 ICP Systems

Page 6

For Users on Resilient 3300 ICP Systems

If during a call, you hear two beeps repeated every 20 seconds it means that your phone is switching to a secondary 3300 ICP system. The call continues and there is a change in the operation of some keys and features on your phone. Normal operation resumes when your phone switches back to the primary system. If your phone is idle and switched to the secondary system, you'll see a flashing rectangle on the display. The rectangle remains until the switch to the primary system is complete.

TIPS FOR YOUR COMFORT AND SAFETY

Don't cradle the handset!

Prolonged use of the handset can lead to neck, shoulder, or back discomfort, especially if you cradle the handset between your ear and shoulder. If you use your phone a lot, you may find it more comfortable to use a headset. See the section on headset usage elsewhere in this guide for more information.

Protect your hearing

Your phone has a control for adjusting the volume of the handset receiver or headset. Because continuous exposure to loud sounds can contribute to hearing loss, keep the volume at a moderate level.

Angle the phone for easier viewing

The stand built into your phone tilts to give you a better view of the keys.

To tilt your telephone for better viewing:

1.Press the tilt-release paddle on the telephone base.

2.Tilt your telephone to the desired angle.

3.Release the tilt-release paddle.

-2-

Image 6
Contents IP Phone 3300 ICP Contents Call Handling Telephone status indicators About Your PhoneDont cradle the handset Tips for Your Comfort and SafetyFor Users on Resilient 3300 ICP Systems Protect your hearingPage Changing Handsets Handset Receiver Volume ControlCustomizing Your Phone Ringer ControlDisplay Contrast Control Speaker Volume ControlFeature Keys Language ChangeAnswer a call Making and Answering CallsMake a call RedialSpeed Call Keys To dial a stored Speed Call numberTo store a Speed Call number Speed Call Personal On-Hook DialingAuto-Answer Call Handling HoldTransfer Swap ConferenceConference Split To leave a ConferenceCall Forward To program Call ForwardTo turn Call Forward on and off once it has been programmed Call Forward Remote Call Forward End Chaining Call Forward OverrideMessaging Advisory Messaging Cancel Callback Messaging Cancel All CallbacksMessaging Callback Using Advanced Features Account CodesAttendant Call Hold Remote Retrieve Call Park To park an active callTo retrieve a parked call Call Pickup CamponDo Not Disturb Override PagingDirect Paging To disable Headset Operation To enable Headset OperationTo answer a call when Auto Answer is disabled Headset OperationMusic Headset Operation with Feature Control SwitchTo turn Music on and off when the set is idle To answer a callTrunk Flash To respond to a Group Page by using Meet Me AnswerGroup Paging / Meet Me Answer To make a GroupTo stop and save a recording Record a CallTo start recording while on a 2-party call To stop and erase a recordingTo log out of Hot Desking phone the phone must be idle Hot DeskingTo log into a Hot Desking phone the phone must be idle To remotely log out a Hot Desking phoneTag Call To tag a malicious callCall History To display the call history, and view call detailTo return a call To delete all missed, answered, or outgoing call logs To delete a particular call from the call log
Related manuals
Manual 25 pages 16.55 Kb